[access control function] [basic function]

[232-485 or tcp/ip network communication mode]

1. 20000 registration card permissions: each controller has 20000 registration card permissions.

2. 100000 offline storage records: 100000 card punch records can be stored offline. Each record information contains complete information such as whether the card number and location pass or not. If the storage is full, the oldest information is squeezed out in a stack way and the latest information is saved. If the button information recording and alarm recording function are enabled, these will also be counted as recording information. If not enabled, only the card swiping information will be recorded.

3. Flexible authority management: you can set which doors a person can pass, or someone can pass through all the doors. You can also set which doors some people can pass. The setting results can be arranged by door or by person. Users can see clearly who can pass through a door or which door a person can pass through. At a glance, and can be printed or exported to excel reports.

4. Time period permission management function: you can set a person to a door, a few days a week can enter the door, three to several points a day can enter the door.

5. Offline operation: after uploading through software settings, the controller will remember all permissions and record all information. Even if the computer software and computer are shut down, the system can still operate offline normally, and even the power failure information will never be lost.

6. Real time monitoring photo display of door status: it can monitor the card swiping and entering and exiting of all doors in real time, and can display the photos stored in the computer in advance by the card swifter in real time, so that the security personnel and I can check. If the door magnetic signal line is connected, the user can see at a glance which doors are open and which doors are closed.

7. Real time extraction: users can automatically extract the records in the controller while monitoring in real time, and upload one to the computer database by brushing one.

8. Forced door closing forced opening: if some doors need to be opened for a long time, it can be set to normally open by software, and if some doors need to be closed for a long time and no one is expected to enter, it can be set to normally closed.

9. Remote door opening function: after receiving the instruction, the administrator can click the "remote open" button on the software interface to open a door remotely. Remote door opening record can also be recorded by setting.

10. Interface locking function: the operator temporarily leaves the job position, and can lock the interface. The background software continues to run and monitor. Other people cannot take advantage of the opportunity to operate the software. After the operator returns, enter the password and return to the software operation interface.

11. Time link function: if the customer requires more than 3 times for daily time period (several points to several points can enter), the time link can be used to expand to 6 or 9 or more.

12. Modify a few permissions and upload separately: if the user only adds or modifies the permissions of several people, it does not need to upload all permissions again. The permissions added and modified can be uploaded separately without too much time. The same is true of losing.

13. Quick query of number of people in the door: you can query the number of people in a door or in a certain area (several doors), and display the list of personnel in this area. For example: for company management, the boss or personnel department can quickly know how many people have come to work in the company. If it is abnormal, you can immediately make an attendance statistics to check the personnel who violate the discipline. For example: some companies are arranged with meals. You can quickly know how many people work in the company, can inform the canteen of the number of people, how many people do their meals, and avoid waste.

14. Quick location query: you can quickly find out where someone is now and how long he has been there. For some big companies, it is not allowed to turn on the mobile phone or the mobile phone can not be contacted for confidentiality, so that you can know where he is in the building and find him.

[access control function] [extended function]

1. Card + password function: if the card reader with password keyboard is used, the system will have card + password function. That is, the door can be set to, users need to swipe the card and input the correct password, and the card and password are correct before opening the door. You can have a password one card at a time, that is, everyone has their own password. This function can prevent the card from being picked up to open the door, or steal the card of colleagues to open the door to do something that is not done. For the same door, some people can set up the card + password, and some people can enter the door only by swiping the card. The password can be 1-6 digits.

2. Manual input card number + password opening function: if the user enables this function, it is unnecessary to bring card. Only enter * card number * password to open the door and store the entry and exit record.

3. Super pass password function: each door can be set with up to 4 pass passwords, that is, as long as any one of these passwords is entered, the system will not record the event and the person who press the password.

4. Linkage output function: if the controller is connected with alarm output and fire linkage extension board, it has the function of driving another relay to operate simultaneously when the door is opened legally to control more equipment. The action time of linkage relay can be set for 0-600 seconds.

5. Illegal breaking into the police: or forced door opening alarm. That is, the door is not opened or broken by legal means (card swipe button, etc.). The system software monitoring interface will prompt the time and position of the alarm information in red, and drive the computer speaker to remind the personnel on duty to pay attention. If the controller is connected with alarm output and fire linkage extension board, it can also drive the alarm to call on site to deter criminals and remind security personnel to come. The function needs to be equipped with door magnet or electric lock with door magnetic feedback signal output and connected to the controller.

6. Alarm when the door is not closed for a long time: the door is opened for a long time (how many seconds to open before alarm can be customized). The system software monitoring interface will prompt the time and position of the alarm information in red, and drive the computer speaker to remind the personnel on duty to pay attention. If the alarm output and fire linkage extension board are connected, the alarm can also be driven on site to call, and relevant personnel can be reminded to close the door. The function needs to be equipped with door magnet or electric lock with door magnetic feedback signal output and connected to the controller. It can be set to how many seconds the alarm is or it can be alarm until reset.

7. Duress alarm: when the staff is forced to open the door, the staff can enter the coercion password on the password keyboard, and the door is opened, and the staff will not be hurt by the old and angry gangsters. The software monitoring interface of the general control center has shown the alarm information of the forced opening in the place and take measures. Meanwhile, the computer speaker in the control center will send out alarm sound, which will remind the staff on duty to pay attention in time. This function is much more shared in the halls of savings offices, bank vaults and so on.

8. Illegal card swipe alarm: also called invalid card swipe alarm. That is, someone tries to swipe the card with unauthorized card. The system will give a red warning in the monitoring software interface and drive the computer speaker to remind the personnel on duty. If the alarm output and fire linkage expansion board are connected, the alarm can also be driven on site to alarm to deter the people who have bad intentions on the site and remind the security personnel to come.

9. Anti submarine anti tailgating function: in some specific occasions, card holders must swipe cards from a door and the card swipe records must be strictly corresponding once in. When entering the door, the card is not swipe, and the system will not allow others to go out when they go out. If he does not swipe the card outside, follow others and go out, he will not be allowed to enter next time. Or someone swipe in and throw it out of the window to someone else, trying to get in, and the system will refuse to swipe the card. If the user sets to enable this function, it can be realized. This function is generally used in military, national defense research and other occasions. Our system can only achieve the door back, that is, from this door, we must swipe cards out of this door, and can not do it from this door, and from another door. It can also achieve the anti submarine return in the controller, such as double door controller, from any door of two doors, from any one door can be. It can also be used for four door controller, which door and which doors are anti submarine return to each other, and for some exhibition fields. It is required to enter from the designated door and exit from the designated door.

10. Interlock: there are special occasions for the requirement that before one door is closed, the other door is not allowed to enter. The double door controller can realize double door interlock, and the four door controller can realize the double door interlock, three door interlock and four door interlock. This function is mainly used in strict situations such as bank savings office Treasury.

11. Multi card opening: there are certain occasions that need to enable this function, that is, several people are required to be present at the same time, and then swipe the card door to open. Someone can not open the card when he is alone at the door. This function is generally used in the Museum of antique collection place in bank vault. The system can be set as the door entry multi card door single card door, can also be set to enter the door multi card, go out also need to be more card.

12. The function of regular opening and closing is also called the function of timed task. Some foreign administrative offices, such as the Embassy of the office hall of the Civil Affairs Bureau, etc. It is required that the door of working hours be opened during the day, and the personnel who come to work outside can enter and exit freely. After work at night, the personnel of the unit shall be required to swipe their cards before entering and leaving the office. No foreign personnel are allowed to enter. At night, the door remained closed and the staff of the unit were not allowed to go out. This function can be enabled to implement. For example, set the door to open normally at 8:30 a.m. and close at 112:00 a.m. online at 18:30 p.m. This function can be set for a door or all doors. Each controller can set up to 64 scheduled tasks. The function can be run offline.

13. Record button open event: enable this function to record when the button has been opened by someone.

14. Timing extraction record function: it can set up the automatic extraction of records in the controller in several points of computer program. You can set the time of multiple extraction records in a day. This feature requires that both the computer and software are in operation at the time.

15. Timing upload permission function: when uploading permission, the controller cannot judge the card right and legitimacy, and it needs to be uploaded before it is finished. Therefore, if a large number of upload permissions are used, the controller will have a short time to not allow the permission card that has not been uploaded to pass, so the use of timed upload permission function can make the system enter when no one is using the access control at night Line upload automatically. The function function requires that the computer and software are in operation at that time.

16. It can be directly switched to the cell management interface: it can be switched from office management interface to cell management interface through the settings in the options. The original name of the original "department team" in the corresponding interface is automatically changed to "Building No." and so on, which fully meets the personalized interface requirements and name matching of the community management.

17. Emergency door closing function: in some cases, it is called "emergency double closing function". This function does not need software setting. It only needs to connect emergency switch to specific connection point of controller. In case of emergency, press emergency switch, all doors under the control are closed, and no door can be jammed by pressing button and card brush. It is used for "closing door and catching thief" and other occasions. Pull off the emergency switch system to return to normal operation.

18. Operator branch management function: some companies require branch departments to manage access control and attendance, and operators in their own departments manage doors and permissions of their own departments. Senior administrators can manage the doors and people of the company.

19. Video access control function (take photos and videos after swiping and button): if the access control system is equipped with micro cultivated video access control accessories, it can realize the automatic photographing and 3 seconds video after the card swiping or button is opened, so as to check whether the card holder is the cardholder who is coming to open the door. Recording photos and videos is convenient for after-the-spot query, and can also monitor several video scene in real time. This function requires the computer to open and run the video monitoring interface of the software.

20. Electronic map function: the icon of the door can be placed in a certain position of the corresponding map, and the display is more intuitive and humanized during real-time monitoring.

21. Setting of card opening and closing: Brush legal card, relay on, brush relay off.

For example: in some schools, E-teaching rooms, projectors and other E-teaching equipment are not allowed to be used casually. The legal teacher swipe the card, and power the projector through the relay. After class, brush the card again. Turn off the power supply. Others can't use it.

22. Opening the first card: for example, a company requires that several persons designated by the company have the permission to open the first card. Only those who have the permission to open the first card in the morning can swipe the card, and other personnel can enter the door legally or keep the door open, When the door is closed on time by the evening, if the person with the first card opening permission does not come, other legal cards cannot enter, and someone who has the permission to open the first card must wait for someone who has the permission to open the door of the first card.

Attendance function [normal shift attendance management function]

1. Flexible time setting: you can set a few minutes late, which can not be counted as late, to adapt to the time difference of each employee table, or the company's humanized regulations can be a little late can be integrated. If strictly required, it can be set to 0, that is, one second late is not allowed.

2. The legal or self-defined holidays can be set, and the processing function of national day long holidays can be set: National Day of May 1st New Year's day and other holidays can be set, or defined by yourself. For example, factory day, etc., fully intelligent to solve the problem of attendance setting of national day and other long holidays. National day long leave is a policy implemented in recent years in China. The government will transfer a Saturday and Sunday before national day to take a growth holiday with National Day holiday, and find a similar Saturday Sunday to make up for work. Many software can not manage attendance in this special situation and form a loophole in attendance

3. Define punishment measures: for example, how many minutes is the absence of work when you are late and leave early.

4. You can specify some doors to perform attendance: you can specify some points for attendance, and some points only do door disable, so as to avoid the attendance data being too complicated or impure.

5. You can set the number of cards a day: you can set it to call twice or four times a day according to the regulations.

6. You can set attendance settings flexibly: you can set it to Saturday and Sunday rest, Saturday work Sunday rest, Saturday first half day shift Sunday rest, etc.

7. You can enter leave application form, add and customize the name of leave flexibly: you can enter personal leave sick leave, annual leave for